Adding devices to the device array

To add devices to the device array:

  1. Click Add in the Device-Array Definition window.
  2. Click the device type in the Array Item Type group.
  3. Type the full path name of the device in the Device text box. If you specified a tape device, the Tape Parameters group becomes active, as Figure 2 shows.
    1. Type the block size in kilobytes.
    2. Click MB (megabytes) or GB (gigabytes) to specify the units to use for the tape size.
    3. Specify the tape size.
  4. When you have included all of the information for the device, click Perform. The device that you added appears in the Array Items list box.
  5. Repeat steps 2 through 4 to add other items to the device array.
  6. When you have added all of the devices to the array, click OK to return to the Device-Array Selection window. Your new array appears in the Current Arrays list box.
  7. Click Cancel to return to the HPL main window.
Parent topic: Adding, editing, and removing devices
Copyright© 2019 HCL Technologies Limited